
This project implements an ecg front end (front end for measure of electrocardiogram) using a folded cascode based architecture
To test the ecg front-end, connect the input signal from the elctrode (ecg singal) to the INp and INm analog pins (ua[5] and ua[4] respectively). Ensure ref (ua[1]) and Vref (ua[2]) are properly biased at 0.9V or at the output of a offset compensation circuit. Observe the output signal at the OUT pin (ua[3]) connecting OUTDRL (ua[0]) a the right leg of the body using another electrode.
Oscilloscope
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | |||
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 |
ua | PCB Pin | Internal index | Description |
|---|---|---|---|
| 0 | A5 | 5 | OUTDRL |
| 1 | A0 | 0 | ref |
| 2 | A4 | 4 | Vref |
| 3 | A1 | 1 | OUT |
| 4 | A3 | 3 | INm |
| 5 | A2 | 2 | INp |