576 Elevator Design
576 : Elevator Design
- Author: Jocelyn Zhu
- Description: Simulation of an elevator design on a digital clock display.
- GitHub repository
- Open in 3D viewer
- Clock: 0 Hz
How it works
The project implements an elevator interface on a digital clock based on user floor selection. The user selects a floor using the board switches, and the display increments/decrements floor numbers according to the elevator's state (moving up, moving down, or idle). Once the elevator reaches the selected floor, the display shows the user-selected floor number until a different floor is chosen or the switches are reset. When the switches are reset, the display decrements back to the default floor.
How to test
Use board switches 0-7 to select the desired floor.
External hardware
A LED display is used to show elevator operation and the selected floor number.
IO
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | Switch 0 | Segment A | |
| 1 | Switch 1 | Segment B | |
| 2 | Switch 2 | Segment C | |
| 3 | Switch 3 | Segment D | |
| 4 | Switch 4 | Segment E | |
| 5 | Switch 5 | Segment F | |
| 6 | Switch 6 | Segment G | |
| 7 | Switch 7 | A dot that appears during the IDLE state |