1 TinyTapeout 7 Factory Test
1 : TinyTapeout 7 Factory Test
- Author: Tiny Tapeout
- Description: Factory test module
- GitHub repository
- Clock: 0 Hz
How it works
The factory test module is a simple module that can be used to test all the I/O pins of the ASIC.
It has three modes of operation:
- Mirroring the input pins to the output pins (when
rst_nis low). - Mirroring the bidirectional pins to the output pins (when
rst_nis highselis low). - Outputing a counter on the output pins and the bidirectional pins (when
rst_nis high andselis high).
The following table summarizes the modes:
rst_n |
sel |
Mode | ou_out value | uio pins |
|---|---|---|---|---|
| 0 | X | Input mirror | ui_in | High-Z |
| 1 | 0 | Bidirectional mirror | uio_in | High-Z |
| 1 | 1 | Counter | counter | counter |
The counter is an 8-bit counter that increments on every clock cycle, and resets when rst_n is low.
How to test
- Set
rst_nlow and observe that the input pins (ui_in) are output on the output pins (ou_out). - Set
rst_nhigh andsellow and observe that the bidirectional pins (uio_in) are output on the output pins (ou_out). - Set
selhigh and observe that the counter is output on both the output pins (ou_out) and the bidirectional pins (uio).
IO
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | sel / in_a[0] | output[0] / counter[0] | in_b[0] / counter[0] |
| 1 | in_a[1] | output[1] / counter[1] | in_b[1] / counter[1] |
| 2 | in_a[2] | output[2] / counter[2] | in_b[2] / counter[2] |
| 3 | in_a[3] | output[3] / counter[3] | in_b[3] / counter[3] |
| 4 | in_a[4] | output[4] / counter[4] | in_b[4] / counter[4] |
| 5 | in_a[5] | output[5] / counter[5] | in_b[5] / counter[5] |
| 6 | in_a[6] | output[6] / counter[6] | in_b[6] / counter[6] |
| 7 | in_a[7] | output[7] / counter[7] | in_b[7] / counter[7] |