66 All Digital DAC and Analog Comparators
66 : All Digital DAC and Analog Comparators
- Author: Maximiliam Luppe
- Description: Implementation of a DAC and three versions of a analog comparator using only standard cells
- GitHub repository
- Open in 3D viewer
- Clock: 0 Hz
How it works
This project implements three different analog comparators based on standard logic cells. They are based on work of Sala et al. [1].
Two DACs, based on the work of Yang et al. [2], also implemented using only standard logic cells, with the aid of two 5-bit counters, generate an analog ramp signal to test the comparators.
- R. D. Sala, C. Bocciarelli, F. Centurelli, V. Spinogatti and A. Trifiletti, "A Novel Ultra-Low Voltage Fully Synthesizable Comparator exploiting NAND Gates," 2023 18th Conference on Ph.D Research in Microelectronics and Electronics (PRIME), Valencia, Spain, 2023, pp. 21-24, doi: 10.1109/PRIME58259.2023.10161936
- D. Yang, T. Ueno, W. Deng, Y. Terashima, K. Nakata, A. T. Narayanan, R. Wu, K. Okada, A. Matsuzawa, "A 0.0055mm<sup>2</sup> 480µW Fully Synthesizable PLL Using Stochastic TDC in 28nm FDSOI," IEICE Transactions on Electronics, v. E99.C, no. 6, 2016, pp. 632-640, doi: 10.1587/transele.E99.C.632
How to test
The SEL pin alows to select two different test conditions. With SEL=0, both counters work together, generating a 10-bit sequence. For each step in the DAC1, DAC0 generates 32 different voltage levels, from near 0V to near Vcc. With SEL=1, both counters work independently.
External hardware
It's necessary an osciloscope to visualize the outputs from the DACs and the comparators.
IO
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | First Counter Clock | VinP | |
| 1 | Second Counter Clock | VinM | |
| 2 | Comparators Clock | VoutP_NAND | |
| 3 | First Counter Enable | VoutM_NAND | |
| 4 | Second Counter Enable | VoutP_AO22 | |
| 5 | Counter Mode Selection | VoutM_AO22 | |
| 6 | VoutP_MX21 | ||
| 7 | VoutM_MX21 |