This design contains a small UART that will output a string every ~1s. No input is required. It expect a 10 MHz clock.
You simply need to connect an UART RX on uo_out[0] and you will see my name ! UART is 115200 baud, one start bit, eight bit of data, one parity bit and one stop bit. I generate a sinus signal on uo_out[7:1].
# | Input | Output | Bidirectional |
---|---|---|---|
0 | none | {‘uo_out[0]’: ‘UART with my name every ~1s.’} | none |
1 | none | {‘uo_out[7:1]’: ‘A sinus is generated.’} | none |
2 | none | n/a | none |
3 | none | n/a | none |
4 | none | n/a | none |
5 | none | n/a | none |
6 | none | n/a | none |
7 | none | n/a | none |