Image path is broken
see How To Test
input 1 - clock input input 2 - feed NOT LED 1 back into the shift register – this creates a pattern where every other LED is switched on input 3 - feed 1 into the shift register if both the first two LEDs are off. This creates a pattern where every third LED is on input 4 - feed 1 into the shift register if the first three LEDs are off. This creates a pattern where every fourth LED is on input 5 - feed 1 into the shift register if all the LEDs are off. This creates a pattern of one light scanning across the LEDs input 6 - set the direction of the shift register input 7 - toggles fixed direction or alternating direction. If alternating direction is set, the direction of the shift register will flip if all the LEDs are off input 8 - enable the clock divider
# | Input | Output |
---|---|---|
0 | clock | LED1 |
1 | not_1 | LED2 |
2 | not_1_2 | LED3 |
3 | not_1_2_3 | LED4 |
4 | not_all | LED5 |
5 | direction | LED6 |
6 | toggle_direction | LED7 |
7 | clock_div_enable | LED8 |